Rectangle Flag Setup

 

1. This will show you how to setup your Rectangle Flag.

2.The package will contain 4 hardware poles that need assembly.
There will be 3 large poles, 1 small.

3. Take the two long poles and use the push button to connect them. They will slide into each other. They will slide into each other.

4. Take the next size up hardware pole with the clamp attachment, and attch it to the other two poles.





5. Finally attached the final and largest pole to the others to complete the pole hardwre. 6. Slide the pole into the bottom pocket of the flag 7. Then slide it all the way through to the top of the printed flag. 8. Attach the completed pole / flag onto the base you have purchaed.




9. The bottom of the flag print will have a loop. and the bottom pole will have a bungee cord. Thread the bungee cord through the loop. 10. Then thread the bungee cord through the metal ring of the pole. 11. Now tie and knot the bungee tightly to secure the printed flag to the hardware pole. Your flag is now ready. 11. Now tie and knot the bungee tightly to secure the printed flag to the hardware pole. Your flag is now ready.